Hoi Kevin,
Ik ben al aan het kijken en 1 van de suggestie op internet is een crossover network cable …dus besteld.
Dmesg geeft het volgende aan toen ik probeerde een crossover kabel te vinden in een stapel oude kabels.
[ 5812.222471] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 5812.228432] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 5812.238513] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 5827.483362] mvneta f1070000.ethernet eth1: Link is Down
[ 5827.494878] mvneta f1070000.ethernet eth1: configuring for fixed/rgmii-id link mode
[ 5827.502671] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 5827.508824] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 5827.519969] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 5842.813326] mvneta f1070000.ethernet eth1: Link is Down
[ 5842.824229] mvneta f1070000.ethernet eth1: configuring for fixed/rgmii-id link mode
[ 5842.832010] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 5842.837897] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 5842.848960] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 5858.103345] mvneta f1070000.ethernet eth1: Link is Down
[ 5858.114376] mvneta f1070000.ethernet eth1: configuring for fixed/rgmii-id link mode
[ 5858.122202] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 5858.128097] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 5858.138389] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 5873.433357] mvneta f1070000.ethernet eth1: Link is Down
[ 5873.444808] mvneta f1070000.ethernet eth1: configuring for fixed/rgmii-id link mode
[ 5873.452747] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 5873.458877] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 5873.468952] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 5888.763354] mvneta f1070000.ethernet eth1: Link is Down
[ 5888.774455] mvneta f1070000.ethernet eth1: configuring for fixed/rgmii-id link mode
[ 5888.782239] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 5888.788132] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 5888.798257] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 5904.063406] mvneta f1070000.ethernet eth1: Link is Down
[ 5904.074450] mvneta f1070000.ethernet eth1: configuring for fixed/rgmii-id link mode
[ 5904.082231] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 5904.088129] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 5904.097983] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready